Armor Panels

Information on our: Ballistic Armor Panels:

Vehicle Bullet Resistant Armor Panels / Bullet Proof Armor Panels

Bulldog Direct Provides the following Vehicle Armor Panels: Kevlar, Flex-Pro, Spectra Shield / Dyneema, and Steel Armor Plate. Bulldog Direct's Bullet Resistant Vehicle Armor Panels provide ballistic protection that is designed to defeat National Institute of Justice [ N.I.J.] and Underwriters Laboratories [ U.L.] threat levels.Information on our Ballistic Armor Panels:

Saferoom Armor Panels

Bullet resistant panels or sheathing [Fiberglass Armor Panels ] are specified in many design situations. The more common applications include, Judge's Benches, courtroom protection for the Jury area and the Witness Box, within the woodwork of Tellers cages or counters in banks, as a bullet proof barrier or wall within government buildings, police stations, District Attorney's offices, U.S. Marshals offices, FBI and ATF offices, guard houses, control rooms within prisons, convenience stores, check cashing stores, etc. Our Fiberglass Armor panels or Steel Armor Plate are sometimes used within high-end residences to make a "safe room" or bullet protected room for high threat situations.

Kevlar Armor Panels

Kevlar Armor Panel is five times stronger than steel panel and ten times stronger than aluminum. Kevlar does not burn or melt. By using Kevlar in conjunction with resins like those used to make fiberglass, it's possible to mold Kevlar in "composite" materials or armor. These composites find use in ballistic helmets and lightweight vehicle armor.as well as bank counters, safe rooms, and guard stations. Kevlar is also used in making Bullet Resistant Vests. Kevlar composites will stop most handgun rounds up to .44 Magum.

FLEX-PRO Armor Panels

FLEX-PRO 50"x41" Thermoformable Vehicle Armor Panels are a laminated composite armor fabricated from a vulcanized urethane 3000 denier aramid composite. FLEX-PRO Armor panels are semi-rigid, and have excellent multi-hit capabilities and will not bunch up or fall down during ballistic incidents or severe vehicle use. Further, FLEX-PRO Armor can be cold bonded to the vehicle surface or mechanically attached. Because FLEX-PRO Armor is based on aramid fibers there is no degradation due to vehicle temperature extremes.

Spectra Shield Armor Panels
Dyneema Armor Panels

Dyneema / Spectra Shieldİ 50"x63" Vehicle Armor Panels are the strongest, lightest, composite ballistic material made today! Spectra Shield isn't a woven fabric like most ballistic materials i.e. [ Kevlar] used today! But instead, a thin,flexible ballistic composite made from two layers of unidirectional fibers held in place by flexible resins. These fibers are arranged so they cross each other at 0 and 90 degree angles, then, both fiber and resin layers are sealed between two thin sheets of polyethylene film similar to sarran wrap. Spectra Shield is ten times stronger than steel.

Steel Armor Plate

Bulldog Commercial Steel Armor Plate is a High Hard Commercial Ballistic Steel that is a Quenched and Tempered Steel Armor Plate which meets National Institute of Justice [ N.I.J.] and Underwriters Laboratories [ U.L.] threat levels.

Fiberglass Armor Panels

Our Fiberglass Armor panels are manufactured using multiple layers of Fiberglass cloth or woven roving that are bonded together with a pre impregnated resin under heat and pressure to form a ridged Bullet Resistant / Bullet Proof Panel. This is the same fiberglass that boats are made from, only with many more layers of the Fiberglass cloth used in the process.

Ballistic Fabrics At last the general public now has a Reliable and Knowledgeable source to purchase the same Ballistic Fabrics that the large Bullet Resistant Vest / Body Armor manufacturers use. All of our Ballistic Fabrics are proudly made in the USA. Most, if not all fabric mills only sell in very large quantities making it impossible for most individuals to make small purchases to experiment or make their own Bullet Resistant Products. These Ballistic Fabrics can be used to make Kevlar Armor Panel, FLEX-PRO Armor Panels.