Ballistic Armor Panels

Bullet Resistant Armor Panels / Bullet Proof Armor Panels:
Kevlar Armor Panels | Flex-Pro Armor Panels,
Spectra Shield Armor Panels | Dyneema Armor Panels | Steel Armor Plate | Fiberglass Composites

An Introduction To Our Ballistic Armor Panels:
Uses and Applications
Factory Direct Pricing

Kevlar  | Flex-Pro  |  Spectra Shield | Dyneema | Steel Armor Plate | Fiberglass

Bulldog Direct Provides the following Ballistic Armor Panels:
Kevlar  | Flex-Pro  |  Spectra Shield | Dyneema |
Steel Armor Plate | Fiberglass

Below you will find a brief description of our Armor Panels , for more detailed information and a link to a pricing request please click on the links provided

Bulldog Direct  Protective Systems Inc. Provides a wide selection of Ballistic Panels for any Bullet Resistant, Blast Mitigation or Fragmentation Protection application, such as  Automotive / Vehicle Armoring, Architectural use for the Harding of Government Buildings, Court Houses, Schools, Banks, Military Installations, Nuclear Power Plants and Safe Room construction. Our Bullet Resistant Armor has many uses for Judges Benches, Speaker Podiums, Fast Food, liquor and Carry Out Stores and Guard Booths. Our  Ballistic Panels can be installed inside walls, doors, desks or any place protection may be required. We don’t just sell these Bullet Resistant Panels, we offer real answers and real solutions.We have a long list of satisfied customers to back up our experience and knowledge.

Please call us at: 513-281-6700 if you have any questions or concerns as to which product best fits your application.

Our Armor Panels can used in the following applications:

Automotive / Vehicle Armoring: For Bullet Resistant Applications Our Composite Armor Panels find extensive use in the automotive armor industry. Kevlar Armor Panels, Flex-Pro thermoformable Armor Panels, Dyneema,  and Spectra Shield Ballistic Panels are well suited for this type of application where lightweight ballistic protection is needed. One advantage of these Bulletproof panels is the fact that they are durable, very lightweight and simple to install. In vehicle Armoring you are adding additional weight to the vehicle , using these composite ballistic panels added weight is kept to the absolute minimum. Not only will they extend the life of your vehicle’s brakes and suspension, they also reduce maintenance costs and improve overall vehicle performance. No special tools are need for cutting or installation. One disadvantage is that they are not well suited for protection from Armor Piercing rounds, attacks from IED’s, or Blast Mitigation.

Automotive / Vehicle Armoring: Blast Mitigation, Armor Piercing Rounds or IED Protection:
Our Steel Armor Plate finds extensive use in the automotive armor industry when you need to protect the vehicle from Armor Piercing rounds, attacks from IED’s, Blast Mitigation, and Fragmentation threats.  Used for the vehicle floor, roof, fire wall, doors and side walls, We provide the following grades: AR 500, MIL-A-46100, MIL-A-12560 Class 1 and 2, MIL-A-46177, from 1/8” to 1-1/2”. For Handgun threats and up to .50 Caliber Armor Piercing rounds, depending on the product .

Architectural Use: For the Hardening of Government Buildings, Court Houses, Schools, Banks, Military Installations, Nuclear power plants and Safe Room construction. Our Steel Armor Plate and Fiberglass Ballistic Armor Panels  would be the most cost effective products for this application, due to there low cost and superior ballistic protection. These panels also add strength and stability for this type of application, especially if your need is for the added protection from Bomb Blasts or heavy Assault Rifle Attacks.  Our Kevlar Armor Panels, Flex-Pro thermoformable Armor Panels, in a stand alone lay up work well for curved applications, such as Judges Benches, Speaker Podiums, or Desks.  Dyneema, and Spectra Shield Ballistic Panels are also well suited for this type of application where lightweight ballistic protection is needed for Assault Rifle protection. Typically their use in Architectural applications would be limited to special applications, due to the higher cost limited sizing, and thickness. Call us if you have any questions about Armor Panel Applications, we will be more than happy to assist you.

Bullet Resistant Vests / Body Armor: Kevlar Fabric is also used in the manufacturer of Bullet and Stab Resistant Vests, Bomb Blankets and Vehicle Floor Fragmentation Blankets. Extensively  used by the U.S.Military, Government and Law Enforcement agencies around the world, but also by private citizens . We provide several  types of Kevlar, Dyneema and Spectra Shield fabrics for these manufacturing  applications.

Please see this link for Ballistic theat Levels: Ballistic Standards

How are Kevlar Ballistic Armor Panels Manufactured:
By using Kevlar Fabric in conjunction with a thermoplastic film system, it's possible to laminate Kevlar into light weight ballistic panels. Specifically designed for the automotive and building construction industry. By using the latest state of the art technologies available today, Kevlar Aramid Fabric is yellow in appearance, has high strength and low density. Kevlar has excellent energy absorption properties and is also resistant to abrasion and thermal degradation, and fire. Our Kevlar aramid panels are produced from a 3000 denier aramid fabric, laminated in a precise number of layers, using a thermoformable adhesive film. This process is done using a platen press under extreme pressure and controlled heat.We have the technical ability to custom manufacturer a ballistic panel to your exact specifications and Spectra Shield Armor Panels are manufactured in much the same manor.