Dyneema Armor Panels

    A quotation request form can be Found at the Bottom of the Page

    Dyneema armor panelsDyneema 50″x63″ Armor Panels are the strongest, lightest, composite ballistic material made today! Dyneema isn’t a woven fabric like most ballistic materials but is instead a thin, flexible ballistic composite made from two layers of unidirectional fibers held in place by flexible resins. These fibers are arranged so they cross each other at 0 and 90 degree angles, then, both fiber and resin layers are sealed between two thin sheets of polyethylene film similar to sarran wrap. Ballistic Protection up to NIJ Level III+.

    Due to Dyneema’s lightweight and waterproof design, some ideal armor applications are: vehicle armoring, helicopters, aircraft, and marine use such as boats, ships, border patrol and homeland security vessels. We can custom fabricate our Dyneema Ballistic Panels to your exact specifications. We have state of the art water capabilities, send us your CAD files and we will do the rest. We can custom manufacture kits for boats, ships,vehicles or other such applications.All of our Armor Panels are made in the USA.

     

    Dyneema armor panels can then be glued in place, or installed with screws, nuts and bolts, etc.

    Please note: specifications and information listed on this page are subject to change without notice.

    Dyneema Armor Panels
    63″x 50″
    ThreatLevel of
    Protection    		ThicknessLbs. per
    Sq. Ft.
    .9mm, .357,& ,.44 Magnum Handguns and lesser threats
    N.I.J. IIIA
    CEN B-4
    7/32″
    1.0 Lbs.
    .5.56mm 55 gr., 30 cal 180 gr.,308 NATO 150 gr. FMJ and lesser threats
    N.I.J. III
    CEN B-6
    .0.75″
    3.75 Lbs.
    AK-47 7.62×39 sc M1943 MSC
    and lesser threats    		N.I.J. III+0.95″3.9 Lbs.
    5.56 M855 and lesser threatsN.I.J. III+1-1/2″6.00 Lbs

    Ballistic Charts.

    Get a Quote

    Dyneema Armor Panel: NIJ Level IIIA (63" x 50") Protection from : .9mm, .357, and .44 Magnum Handguns and lesser threats Thickness: 7/32, Weight: 1.0 lbs per sq.ft.

    Dyneema Armor Panel: NIJ Level III (63" x 50") Protection From: .5.56mm 55 gr., 30 cal180 gr., 308 NATO 150 gr. FMJ and lesser threats Thickness: .73", Weight 3.9 lbs per sq.ft.

    Dyneema Armor Panel: NIJ Level III+ (63" x 50") Protection From: AK-47 7.62x39 sc M1943 MSC and lesser threats Thickness: .95" Weight 3.9 lbs per sq.ft.

    Dyneema Armor Panel: NIJ Level III+ (63" x 50") Protection From: 5.56 M855 and lesser threats Thickness: 1-1/2" Weight 6.00 lbs per sq.ft.


    Due to the nature of our products and services, we require some contact information before we can provide you with a price quotation.

    Fields marked with a red asterix (*) are required. Please note: This information is for our confidential records only and will not be sold or provided to any third party. This information is sent using a secure server making your personal information safe. If you have any questions please feel free to contact us at 513-281-6700, 9AM-5PM M-F EST.

    Mr.Mrs.Ms.

    *First Name (Please no initials):

    * Last:(Please no initials)

    (if applicable)

    * Street Address:(Sorry, NO P.O. Box Address)

    * City:

    * State:

    * Country:

    * Zip Code:

    * E-Mail Address:

    (this is where your quote will be sent)
    Spam / junk email filters may prevent you from receiving our price quotation.

    * Phone Number:

    (with area code, xxx-xxx-xxxx):

    (with area code):

    Checking this box and clicking the Submit Pricing Request Button you are acknowledging that you have read the below terms and conditions, including our payment, warranty return policy and agree to them .

    All transactions with Bulldog Direct Protective Systems Inc. are governed by these Terms and Conditions of Sales, as listed below. When checking the box below and clicking the Submit Pricing Request button, you are acknowledging that you have read these teams and conditions, including our payment and warranty return policy and agree to them. Jurisdictional Issues: This agreement shall be governed by, construed and enforced in accordance with the laws of the State of Ohio, without regard to conflict of law principles. Any action we, or, any third party bring to enforce this agreement or, in connection with, any matters related to this site shall be brought only in either the State or Federal Courts located in the State of Ohio, and you expressly consent to the jurisdiction of said courts. You also expressly consent to pay for any reasonable attorney’s fees for action we, or, any third party bring to enforce, or defend this agreement or, in connection with, any matters related to this site, or sales, and payment disputes. Warranties / Damage Claims: Our Products are warranted for defects in manufacturing only! Our responsibility is to replace products defective in manufacturing only with the same
    or better product, at our sole discretion! Product warranties vary depending on the product. In all cases Bulldog Direct Protective Systems Inc. MUST be notified with in (5) FIVE days of receipt of the product for any possible claims of damage or defects in manufacturing. Any claims after this time frame will not honored. Product Returns: Are not accepted without our expressed written permission. Due to the protective nature of our products: Bulldog Direct Protective Systems Inc. will at its sole discretion replace products defective in manufacture only, providing you follow our return policy described above. unless otherwise noted, all sales are final. Payments: USA Sales:
    We accept payments by: Bank Wire Transfer, Company- Personal Check, or Credit Card [ please add 3% for CC payments]. Export sales: We accept payments by: Bank Wire Transfer. Irrevocable Letter of Credit on a USA Bank. All orders once payment has been made may not be canceled without our expressed written permission. Export Control. The United States Government controls the export of some of our products, services and information. You agree to comply with such restrictions and not export or re-export any materials associated with this web site to countries or persons prohibited under export control laws. By viewing or downloading any such materials, you are agreeing that you are not in a country to which such export is prohibited or are a person or entity to which such export is prohibited.
    You are responsible for compliance with the laws of your local jurisdiction regarding the import, export, or re-export of any such materials. , By sending Bulldog Direct Protective Systems Inc. a Quotation Request, Purchase Order, Purchasing, or any products or services, the BUYER/ Customer represents that he or she agrees to ALL of our terms and conditions, and holds Bulldog Direct Protective Systems Inc. and its manufacturers harmless for any use, of any and all products, services or information listed. It is the responsibility of the BUYER/ customer (not the seller) to ascertain and obey any and all applicable local, State, federal and International laws in regard to use, purchase and possession of these products and services. Warranties. Bulldog Direct Protective Systems Inc. does not warrant the products sold hereunder to be fit for any particular purpose and the BUYER shall assume all risk and liability for results obtained by use of whether singly or in combination with other materials or products. Inasmuch as Bulldog Direct Protective Systems Inc. has no control over the end use to which others may put the materials it does not guarantee that the same results as those herein will be obtained and disclaims responsibility for any consequential damages or death that may occur as a result of such use. Bulldog Direct Protective Systems Inc. Full Terms and Conditions
    Using a credit card for payment does not absolve you from following our terms and conditions of sale.